Yokogawa EJA118E-JMSCC-917DB-AJ16E2SA00-AB22/FF1/D4 Pressure Transmitter

Yokogawa EJA118E-JMSCC-917DB-AJ16E2SA00-AB22/FF1/D4 Pressure Transmitter

EJA118E Diaphragm Sealed Differential Pressure  Transmitters can be used to measure  liquid level, density, and  pressure.Diaphragm seals are connected to the transmitter using capillaries filled  with fill fluid.

EJA118E features include:

Accuracy of + / - 0.2%

The response time is 200 milliseconds

TUV and Exida SIL2 / SIL3 certifications

Local parameter Settings (LPS)

The capillary refill fluid density was compensated actively

Provide HART 5/7, HART(1~5V DC) low power, FF field bus, PROFIBUS PA and BRAIN communication protocols

Parameter

-J              4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)*1

M                    2.5 to 100 kPa (10 to 400 inH2O)

S                     Always S

C                     Always C

C                     660 SST

-9                    Horizontal piping type and left side high pressure

1                     Cast aluminum alloy

9                     1/2 NPT female, two electrical connections with a blind plug *4

D                     Digital indicator *5

B                     304 SST 2-inch pipe mounting, flat type (for horizontal piping)

-A                    Inner Diaphragm, Adapter connection type

J1                   JIS 10K

6                     1/2 inch (15 mm)

E                     316 SST (Adapter material)*4

2                      Flat (no serration)

SA                   316L SST 316 SST (include Adapter)*4

0                      None

0                      None

-A                     For general use (silicone oil) –10 to 250°C –10 to 60°C

B                      Back of diaphragm seal unit

2                      Standard

2                       2 m 7· · · · · 7 m

F11                   FM Explosionproof Approval *1 Applicable Standard: FM3600, FM3615, FM3810, 

                         ANSI/NEMA 250 Explosionproof for Class I,Division 1, Groups B, C and D, 

                         Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G, in Hazardous locations,

                         indoors and outdoors (NEMA TYPE 4X)“FACTORY SEALED, CONDUIT SEAL NOT REQUIRED.” 

                        Temperature class: T6, Amb. Temp.: –40 to 60°C (–40 to 140°F)

D4               M calibration (kgf/cm2 unit)

Company profile

Shaanxi Tebess Electronic Technology Co. LTD established on June 8th of 2010. 

We are authorized instruments distributor of yokogawa, Rosemount, Endress Hauser, honeywell , ABB, YTC .

We offer original products in best price and fastest delivery time, especially for pressure transmitter,

temperature transmitter,flow meterS and valve positioner.

Forwarder  introduce