The EJA430E with DPharp digital sensor offers the performance needed to run your operations at peak performance. This ensures on-spec product, reduced waste, and improved yield, helping you increase profitability.
Japan Yokogawa EJA430E-JAS5J-917NA Gauge Pressure Transmitter
The EJA430E is a high-performance gauge pressure transmitter used to measure liquid, gas, or steam pressure. Featuring Yokogawa DPharp sensor technology, the EJA430E delivers measurements accurately, quickly, and reliably.
Accuracy: ±0.055% of Span (Optional ±0.04%)
Response Time: 90 msec
Stability: ±0.1% of URL per 10 years
For 4 to 20 mA HART / BRAIN (Output signal code D and J) Two wire 4 to 20 mA DC output with digital communications, linear or square root programmable. BRAIN or HART FSK protocol are superimposed on the 4 to 20 mA signal. Output range: 3.6 mA to 21.6 mA Output limits conforming to NAMUR NE43 can be pre-set by option code C2 or C3.
For 1 to 5 V HART (Output signal code Q) Three or four wire low power 1 to 5 V DC output with HART, linear or square root programmable. HART protocol are sup
erimposed on the 1 to 5 V DC signal. Output range: 0.9 V to 5.4 V DC
For 1 to 5 V HART (Output signal code Q) Analog output status at CPU failure and hardware error; Up-scale: 110%, 5.4 V DC or more (standard) Down-scale: −5%, 0.8 V DC or less
Wetted Parts Materials
Diaphragm, Cover Flange, Process Connector, Capsule Gasket, and Vent/Drain Plug
Refer to “MODEL AND SUFFIX CODES.”
Process Connector Gasket
Fluorinated rubber for option code N2 and N3
Low copper cast aluminum alloy with polyurethane, deep sea moss green paint (Munsell 0.6GY3.1/2.0 or its equivalent), or ASTM CF-8M Stainless Steel
Degrees of Protection
IP66/IP67, Type 4X
MODEL AND SUFFIX CODES
The “►” marks indicate the most typical selection for each specification.
*1: HART 5 or HART 7 is selectable. Specify upon ordering.
*2: Users must consider the characteristics of selected wetted parts material and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user’s process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material.
*3: Applicable only for Wetted parts material code S.
*4: Not applicable for electrical connection code 0, 5, 7, 9 and A. Content rate of copper in the material is 0.03% or less and content rate of iron is 0.15% or less.
*5: Not applicable for electrical connection code 0, 5, 7 and 9.
*6: Material of a blind plug is aluminum alloy or 304 SST.
*7: Not applicable for output signal code G.
*8: Not applicable for output signal code F.
Shaanxi Tebess Electronic Technology Co. LTD established on June 8th of 2010.
We are authorized instruments distributor of yokogawa, Rosemount, Endress Hauser, honeywell , ABB,
We offer original products in best price and fastest delivery time, especially for pressure transmitter,
temperature transmitter,flow meterS and valve positioner.
Xi'an XK is one of the professional suppliers of the japan yokogawa eja430e-jas5j-917na gauge pressure transmitter. Offering you the best discount and original sources, we have many types of products for you. Coming in low cost, high quality, cheap price and good measurement performance, we welcome you to buy the product with our agent.